If you're like most people, you probably wind your bobbin on your white sewing machine by hand. But is that the best way to do it?
What are bobbin winders and how do they work?
There are a few different types of bobbin winders on the market, but the most common is the horizontal bar type. This type of winder attaches to the top of your sewing machine and has a series of wire bars that rotate as you sew. This motion winds the bobbin evenly and prevents it from becoming tangled.
If you have a vertical bar type bobbin winder, it attaches to the front of your Winding Machine or Doubling Machine. This type of winder has several small metal blades that move up and down as you sew, which winds the bobbin evenly.
Types of bobbin winders
There are three types of bobbin winders: the hand crank, the motorized, and the robotic. The hand crank is the oldest type and uses your own muscle power to turn the screw. The motorized type is powered by an electric motor and usually has a more compact design than the robotic type. The robotic type is the most modern and uses sensors to detect when the bobbin is wound close to its end, and then automatically winds it for you.
whichever type of bobbin winder you choose, there are some important things to keep in mind. First, make sure that it has a sturdy base so that it won't move around while you're winding your bobbins. Second, be sure to lubricate the bobbin winder every once in a while with a light oil or grease so that it operates smoothly and doesn't wear down too quickly. And finally, make sure that you have an accurate knowledge of how to use your bobbin winder in order to get the best results!
image source: www.pinterest.ph
How to put a bobbin winder on your machine
There are a few ways to put a bobbin winder on your machine. The easiest way is to use the snap-on type that comes with your machine. Simply snap it into place over the bobbin Nylon DTY thread winder hole on the front of your machine, and you're ready to go. If you don't have a snap-on type, you can also use an adjustable screwdriver to tighten the screws on either end of the winder arm. Make sure that the screws are tight enough so that the arm doesn't move, but not so tight that they damage your machine.
If you don't have either of those options, you can also use a regular screwdriver to tighten two screws on each side of the winder arm. This method is more difficult, but it's also less likely to damage your machine.
How to use a bobbin winder
If you’re like most sewers, you probably wind your bobbin on a regular basis. After all, it’s one of the simplest jobs on your machine and it keeps your thread spooled and organized. However, if you’ve never used a bobbin winder before, now might be a good time to get started. Here’s how to use one:
1. Position the winder over the spindle of your machine. Make sure the blade is facing down and that the hole in the base of the winder is lined up with the hole in the machine’s spindle.
2. Insert a bobbin into the winder. The top of the bobbin should be facing up and the ends of the bobbins should be touching each other.
3. Close the lever on the winder so that it compresses the bobbins together. You will now start to see the bobbins spin around on their spindles. Be careful not to pinch your fingers!
4. To stop spinning, simply release the lever on the winder. Your bobbins will now be ready to use again.
image source: www.pinterest.ph
How to take the bobbin winder off your machine
If you want to remove the bobbin winder from your machine, there are a few different methods you can use. The first is to use a screwdriver to unscrew the four screws that hold it in place. If you have a portable machine like Twisting Machine, you can also remove the bobbin winder by lifting it off the machine with the help of the handle.
Conclusion
One of the most common repairs that sewers face is winding a bobbin on a white sewing machine. This guide will show you how to do it in just a few simple steps. Be sure to have your machine and supplies close at hand so you can get started right away!
