Luckily, this is a simple process that you can do at home with just a few tools. Read on for a step-by-step guide on how to replace a belt on a Kirby vacuum cleaner.
Unplug the vacuum cleaner
Turn the vacuum cleaner over so that you can access the bottom. Locate the screws that hold the bottom plate in place and remove them. Set the plate aside and take a look at the belt. If it looks damaged, it will need to be replaced.
To remove the old belt, simply pull it off of the pulleys. To install the new belt, thread it through the pulleys and then pull it tight. Once it is in place, put the bottom plate back on and screw it into place.
Test out the Handheld vacuum cleaner to make sure that the new belt is working properly. If all goes well, you should be good to go!
image source: https://www.pinterest.ph
Remove the old belt
1. First, you'll need to remove the old belt from your Kirby vacuum cleaner. To do this, simply unscrew the plate on the bottom of the vacuum that covers the brush roll.
2. Once the plate is removed, you should be able to see the belt wrapped around the brush roll. Gently pull the belt off of the brush roll and discard it.
3. Now that the old belt has been removed, you can begin installing the new one.
4. Start by threading the new belt around the brush roll, making sure that it's snug against the roller.
5. Once the belt is in place, replace the bottom plate and screw it back into place.
6. That's it! You've successfully replaced the belt on your Kirby vacuum cleaner.
Install the new belt
With the power off and the Wet&Dry vacuum cleaner unplugged, remove the bottom plate of the vacuum by unscrewing the screws that hold it in place.
2. Locate the old belt and remove it from the vacuum.
3. Install the new belt onto the vacuum.
4. Replace the bottom plate and screw it back into place.
5. Plug in the vacuum and turn it on. The new belt should be tight and not slip when you use the vacuum.
image source: https://www.pinterest.ph
Conclusion
If your Kirby vacuum cleaner is in need of a new belt, don't worry - replacing it is a relatively simple process. Just follow the Vacuum cleaner Supplier steps outlined in this article and you'll have your Kirby up and running with a new belt in no time.
