Brake Fluid Service Warning Light Reset of Your BMW Greensboro

agellcharlotte

433
views

BMW is a high-end, high-performance automobile. So, if you're the happy owner of one, you'll want to make sure it keeps its nice looks and outstanding handling for many more years. You must now understand that brake fluid is the lifeblood of your vehicle's braking system. This guide will show you how to clear the BMW brake fluid level warning sign.

BMW Service Greensboro NC for Brake Fluid Warning

If you have not replaced the brake fluid at the required interval, the BMW brake fluid service alert will pop up. The half-full circular light reminds you to change the brake fluid. If the brake fluid level is low, the indicator may also illuminate. Call on experts for BMW Greensboro inspection and tune-ups.

Symptoms of BMW Greensboro

BMW brake service reminder
Service symbol on dash and iDrive
Brake Fluid Service Required under Vehicle Status

Procedure for Fixing the Issue of BMW

The Trip Odometer Reset button on the instrument cluster is used in the following fashion. It does not necessitate the use of a scanner or any other specialized equipment.

Turn on ignition. Put your key in the ignition. Turn the key two times on older BMW models. On newer models, push and hold the START button while keeping the brake pedal down. All of your dash lights will illuminate. It is not necessary to start the engine.
Wait a few seconds for any warning messages to be removed.
Hold down the Odometer Reset button on the instrument cluster.
A little triangle will pop up on the dash when you hold the Odometer Reset button. Hold the Reset button down until the Oil Symbol or Microfilter Symbol appears.
You've arrived to the Service Menu. You may reset any BMW CBS Service Reminder from this page. Because we want to clear the BMW brake fluid warning, press and hold the Reset button until the brake reservoir symbol appears. You may also use the +/- buttons on the cluster or the Check button on the steering column stalk to switch between things.
Then, for roughly 5 seconds, press and hold the Odo Reset button. The word "reset" will pop up on the screen.
Release the button and push and hold it once again. The reset will be finished after another five seconds. The color of the light should shift from red to yellow. OK or Reset should be changed to Reset.

If you are unable to reset the BMW Brake Service light using the techniques outlined above, it is highly recommended to consult the owner's handbook for more information. To avoid unnecessary issues with your braking system, you need to consider BMW service Greensboro NC.

The preceding instructions will benefit owners of the 1, 3, 5, 6, 7, X1, X3, X5 series.