Lubricated Plug valve manufacturer in India
Specialityvalve is best Lubricated Plug valve manufacturer in India. Lubricants or sealants are used in lubricated plug valves to make operation easier over a wide range of operating pressures. The Lubricants film is used between the plug and the body. It requires lubricant injection on regular basis. The lubricant must not be washed away by the fluid flow, must not contaminated the fluid, and must be able to sustain line temperatures. Plastic sealants are used in the plug valves. It is essential to use effective sealant with properties like resistance, elasticity and ability to make a seal around each body part. The lubricant coating prevents corrosion on the metal surface between plug and the body
Description
Body materials: Carbon steel, cast steel (WCB, WCC, WC9, WC6, LCC, LCB) Cast iron, ductile iron, SS304, SS316, CF8.
Class: 150-2500. PN16 – PN450.
Size: ½” to 24”.
Ends: Socket weld, buttweld, flanged, threaded.
Operations: Lever operated, Gear operated, Pneumatic Actuated, Electric Actuated.
Advantages of Lubricated Plug Valve
· Less force needed to open and close the valve
· Stop Corrosion of the plug
· Compatible work in high temperature and pressure
· Available in wide size range
Industries that use lubricated plug Valves
· Chemical
· Cementing
· Oil piping
Following are some other valves which we manufacture
Plug valve
Specialityvalve is best Plug Valve Manufacturer in India. A plug valve is a cylindrical or cone-shaped valve that controls the flow of fluid (medium) by rotating within the valve body. With plug valves, one or more hollow channels are often placed horizontally in order to facilitate the flow when the valve is open. This bored tunnel is in line with the flow when it is open. Solid plug section of plug valve restricts flow when it rotated 90 °. When rapid operation is necessary, it is utilized in place of a gate valve. It's suitable for high-pressure, high-temperature applications.
Lift Check Valve
Specialityvalve is leading Lift check valve manufacturer in India. It is designed to prevent reverse flow in the installations. Instead of a hinged disc, lift check valve uses a guided piston that move vertically up and down inside the valve. The lift check valve disc is also known as the Lift. When there is enough pressure, the piston or the disk is lifted, allowing flow to pass through. Again, reverse flow will close the valve returning it to its lower position. Lift Check valve also used as flow controller. These valves are used for pumping, irrigation and industrial fluids. They are also used with air, gas, water and steam. These valves are mainly used in water application, high – rise building, etc
Diaphragm valve
Specialityvalve is the main Diaphragm valve manufacturer in India. Diaphragm valves are open-close valves that can operate in both directions. They regulate the area via which media can enter and exit the valve, influencing the liquid's speed and velocity. The name "membrane" valve comes from the fact that it is controlled by a thin, flexible membrane that opens and closes the valve.
Metals such as stainless steel, plastics, and even single-use materials can be used to build them. Diaphragm valves use a linear compressor, similar to pinch valves, to bring a thin diaphragm into contact with the valve body. They can be manually or automatically operated and enable discrete and variable pressure control. Diaphragm valves are ideal for moderate pressure and temperature applications needing stop/start fluid control because they are clean, leak-proof, easy to maintain, safe, and effective.
Specialityvalve is leading Lubricated Plug valve manufacturer in India. Customize the valve according to need of customer. By having an engineering-based team we can understand the technical needs of our clients in a better way. We believe in continuous improvements in our products to keep ourselves competent in the market.
Visit our site for more information https://www.specialityvalve.com/product-category/lubricated-plug-valve/.
