Dust and Fume Extraction System, Electrostatic Dust Collector System, Multiclone/Cyclone Dust Collector Manufacturers, Suppliers in India
Sep 02, 2019
Environment
A dust/fume extraction system is an air quality improvement system used in industrial and commercial production shops to improve breathable air quality and safety by removing particulate matter from the air and environment. Dust extraction systems work on the basic formula of capture, convey and collect.
Capture: This is accomplished with well designed capturing suction hood (Conventional or Swiveling) to catch dust from its source of origin. Many times, the machine producing the dust will have a port to which a duct can be directly attached.
Conveying: This is done via a properly designed ducting system and manifolds to maintain a consistent minimum air velocity required to keep the dust in suspension for conveying to the collection device.
Collection: This is done via a variety of means, depending on the application and the dust being handled. It can be as simple as a basic pass-through filter, a cyclonic separator or an impingement baffle. It can also be as complex as an electrostatic precipitator, a multistage bag house or a chemically treated / water based wet scrubber.
Enviropol Engineers is a leading electrostatic dust collector manufacturers, suppliers and exporters from India. We are supplying high quality dust collection system, multiclone dust collector, cyclone dust collector around the world at the most competitive prices.
Our Manufacturing Range
+91-8800699250 , +91 120 4540881-9
In this emerging world as the human race learned to evolve, new industries were being setup to fulfill the needs of the people. With increase in population & Industrialization, when the production increases the Emissions from the Process also increases, With Time the emissions from the Industries also exceeded the Norms set by Government which led the Air Pollution Control Equipment to step in to assist these industries in controlling Pollution & meeting Pollution control Norms. There were many methods formulated by Air Pollution Control System manufactures to overcome these problems faced by industry by providing Advanced Air pollution control technology . After more research, these technologies were divided into 2 categories Dry and Wet type by Air pollution control device manufacturers in India. There are some differences in these air filtration systems used according to the application.
The Dry technology is the most common and vastly used across industries. If we talk about pharmaceutical sector their chemical dust is harmful & has to be collected , so in this type of application Cyclone Dust Collector or Bag filters are recommended by Dust Collector Manufacturers as the norms are getting more stringent, also Dry Electrostatic Precipitator and Cartridge Filters in other industries by Bag Filter Manufacturer, Electrostatic Precipitator Manufacturers and Cartridge Filter Manufacturers. With the increase in Energy generation through Power Plants, for Safe & clean vicinity & healthy environment, Fume extraction system was introduced to extract the fumes from the Boilers/Furnaces or incinerators .
During 20 th century the wet scrubbing system was introduced followed by Slurry Dewatering machine or system where high efficiency was required by Power Plants & Industries. Wet technology was also used to remove gaseous pollutants like Sox, NOx, Lead etc. With the stringent norms for Gaseous pollutants, Flue Gas Desulphurization Technology was developed to trap Sox. But there are only few reputed Flue Gas Desulphurization System manufacturers in India & making Environment cleaner & greener. India being a developing country and with emerging industrialization, India is the world’s Highest SOx Emitter. You can find more about FGD using hashtag Flue Gas Desulfurization India.
Enviropol is doing every bit to save our mother earth from various pollutants.
